Warehouses of Multinational Companies (MNCs)
Rocksun Industrial Evaporative Coolers: Dependable Cooling for Large Warehouses
When your warehouse handles valuable products or runs nonstop, consistent climate control is essential. Rocksun’s industrial evaporative coolers deliver powerful, energy-efficient airflow that keeps temperatures stable, protects stock, and boosts worker comfort. Designed for the scale and demands of modern supply chains, our systems perform in facilities ranging from e-commerce hubs to distribution centers.
Why Rocksun for Warehouse Cooling?
Proven Deployments in Global Facilities
- Thousands of Installations
Our coolers power warehouses over 200,000 sq ft—tackling high ceilings, vast aisles, and heavy equipment movement. - Optimized Performance
Strategic unit placement and simple speed controls ensure even air distribution, eliminating hot spots near doors or machinery.
Built to Last in Tough Environments
- Heavy-Duty Construction
Galvanized steel frames and powder-coated cabinets resist dust, moisture, and daily wear. - Reliable Components
Commercial-grade fans, motors, and pumps—each backed by a one-year parts warranty under normal use. - Low Maintenance
Quick-release panels let you clean or swap cooling pads in minutes; standard water connections simplify refills.
Key Benefits & Features
Energy-Smart Operation
- Up to 70% Lower Power Use
By relying on water evaporation instead of compressors, our systems draw far less electricity than conventional air conditioners—saving on energy costs. - Eco-Friendly Cooling
Reduced power demand lightens your facility’s electrical load and minimizes environmental impact.
High-Volume Airflow
- 1,500–3,500 CFM per Unit
Powerful fans deliver a steady breeze that covers wide aisles and tall storage racks, keeping every corner cool. - Modular Scalability
Add or remove units to match warehouse size and seasonal demand—no major infrastructure changes needed.
Water-Efficient Design
- Advanced Cooling Pads
Honeycomb pads maximize evaporation with minimal water use—up to 40% savings compared to older models. - Automatic Shut-Off
Prevents overflow; clear water-level indicators let staff monitor supply at a glance.
Simple Controls & Setup
- Intuitive Speed Dial
Easily adjust fan speed without special training. - Plug-and-Play Installation
Position the unit, connect water and power, and switch on—installation completes in under an hour.
Real-World Case Studies
Case Study 1: Amazon Fulfillment Center
- Facility Type: Large e-commerce warehouse
- Challenge: Heat pockets near loading docks and busy aisles caused worker fatigue and slowed operations.
- Solution: Installed 20 units of RS-2500 Industrial (3,200 CFM each) with directional airflow dampers.
- Results:
- Maintained a uniform 25 °C throughout the space
- Boosted order-picking speed by 15%
- Reduced overall cooling energy use by 20%, saving substantial annual costs
Case Study 2: Distribution Hub, Gujarat
- Facility Type: FMCG distribution center
- Challenge: High humidity was affecting product integrity on packaging lines.
- Solution: Deployed hybrid Rocksun coolers with enhanced dehumidification cycles.
- Results:
- Achieved a 12 °C drop in ambient temperature
- Eliminated packaging spoilage reports
- Ensured uninterrupted daily operations during peak summer months
How to Choose the Right Cooler for Your Warehouse
- Calculate Cooling Needs
- Compute cubic footage (length × width × height).
- Account for heat sources: machinery, lighting, and frequent door openings.
- Target total CFM equal to at least 1.5 × warehouse cubic feet per minute.
- Select Durable Materials
- Galvanized steel or powder-coated frames resist corrosion in dusty or humid environments.
- Reinforced cabinets protect against impacts from forklifts or carts.
- Verify Water & Power Requirements
- Ensure a steady water supply via tap connections or overhead tanks.
- Confirm availability of single-phase or three-phase power based on motor specs.
- Plan for Future Growth
- Start with baseline units and leave capacity to add more during peak seasons—no downtime or heavy retrofitting needed.
- Consider Monitoring Options
- Basic models use manual gauges; advanced units offer optional digital displays for temperature and water-level monitoring.
Bringing It All Together
Rocksun industrial evaporative coolers offer:
- Proven Reliability: Trusted in thousands of large-scale facilities worldwide.
- Energy Efficiency: Slash cooling costs with up to 70% lower power draw.
- Ease of Use: Rapid installation, simple controls, and minimal upkeep.
- Scalable Design: Add or remove units to fit changing warehouse needs—no major retrofits.
- Warranty Assurance: One-year coverage on fan, motor, and pump for worry-free operation.
When stable temperatures, protected inventory, and worker productivity depend on your cooling system, choose the solution designed for real-world industrial demands. Partner with Rocksun for dependable, cost-effective warehouse climate control that delivers results day after day.
Next Steps:
- Request a Free Site Assessment
- Download Our Catalogue
- Contact Our Industrial Sales Team
Frequently sked Questions Rocksun Air Coolers
Q: Can evaporative coolers handle very high outdoor temperatures?
A: Yes. By positioning units near heat sources (loading bays, machinery), you’ll see ambient drops of 10–15°C even when outdoor temperatures exceed 40°C.
Q: How much water do these coolers use?
A: With advanced honeycomb pads and auto shut-off valves, water consumption is up to 40% lower than older evaporative models.
Q: What maintenance is required?
A: Clean cooling pads every 4–6 weeks during heavy use. Check motors and pumps quarterly. Replace pads annually for peak efficiency.
Q: What power connection do these coolers require?
A: Rocksun industrial coolers run on standard single-phase or three-phase AC power, depending on model size. Check the nameplate for your unit’s voltage and amp draw, and ensure your facility’s circuit can handle the load.
Q: How noisy are the industrial units in a busy warehouse?
A: Despite their power, units operate around 55–60 dB, similar to normal conversation levels in a factory. Strategic placement and optional sound-damp panels help minimize distractions.
Q: Can these coolers run continuously, 24/7?
A: Yes. Rocksun industrial coolers are designed for nonstop operation. Regular pad rinses every 4–6 weeks and quarterly pump checks are all that’s needed to keep them running reliably.
Q: Are spare parts and consumables easy to get?
A: Absolutely—replacement cooling pads, pumps, and fan assemblies are stocked by our national distributor network. In most regions, parts arrive within 48–72 hours of ordering.
Q: What is the expected service life of a Rocksun industrial cooler?
A: With routine maintenance (pad cleaning, pump inspection) and occasional part swaps, you can expect 8–10 years of dependable service. Many installations have lasted well beyond that with minimal downtime.
